This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.
ROCK COUNTY, WI — Emergency crews responded to a reported structure fire at Marcheville, Inc. late Thursday night, July 16, 2026, after dispatchers received the initial call just after 11:00 p.m. The response ultimately concluded with no fire found, as dispatchers indicated the alarm may have been faulty following an on-site investigation.
Initial Response
Scanner traffic first indicated the call at 11:12 p.m., when dispatchers reported a drive fire with unit 142 en route to Marcheville, Inc. in Rock County. A second unit, identified over the scanner as 2-0, was also heard announcing it was en route to what dispatchers were characterizing as a structure fire at that time.
Janesville Fire Department Joins Response
At 11:27 p.m., scanner traffic indicated that crews had made entry into the building from the inside following an alarm activation. Dispatchers confirmed the alarm was in service, with the transmission referencing what appeared to be a couple of zones — described as “couple of 8” — though the exact zone designations were not clearly broadcast. Simultaneously, Janesville Fire Department was heard responding to the fire alarm, with scanner traffic indicating the department requested both a police department presence and a fire advisor at the scene.
Persistent Alarm Issues Noted
By 11:31 p.m., scanner traffic indicated that crews on scene continued to experience issues with the alarm system, with dispatchers noting multiple alarm activations were occurring. The nature of those ongoing alarm activations was not further specified in scanner traffic.
Scene Cleared, Faulty Alarm Suspected
At 11:40 p.m., dispatchers broadcast to units on scene that the alarm was possibly faulty, noting that nothing had been found following the investigation. The all-clear appeared to bring the active response phase to a close, though scanner traffic did not specifically confirm when all units cleared the scene.
No injuries were reported in scanner traffic, and no fire was confirmed at the location. The cause of the repeated alarm activations was not determined based on available scanner traffic.
Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.

