This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.
ROCK COUNTY, WI — Multiple fire units responded to a series of overlapping fire and hazard calls across Rock County on the evening of Thursday, July 2, 2026, beginning around 6:52 p.m. and stretching past 7:30 p.m., according to scanner traffic monitored throughout the evening.
Downed Lines and Grass Fire Near Six Corners Road
The first report, logged at 6:52 p.m., indicated that a tree had fallen and was leaning against utility wires, though dispatchers noted at the time that the tree was not on fire. By 6:56 p.m., Janesville Fire was heard on scanner responding to a structure fire at the intersection of Six Corners Road and North Shrine, with vegetation reported in the vicinity of the call.
At 7:02 p.m., Janesville Fire units on scene reported downed lines and a small grass fire burning around a utility pole. Scanner traffic indicated the pole itself was described as secure, with the fire limited to a small area around the wire. No injuries were reported in connection with the grass fire based on available scanner traffic.
Structure Fire With Evacuation Reported
At 7:05 p.m., Janesville Fire units radioed that they were dealing with a structure fire with smoke, and that an evacuation was in progress, according to scanner traffic. Details on the specific address or structure type were not broadcast in available scanner audio. Brush 372 was heard responding to a structure fire incident at 7:06 p.m., and Rock County fire units, including unit 344, were noted heading to St. Mary’s at 7:15 p.m., though the nature of that detail was not fully clarified on scanner.
At 7:28 p.m., scanner traffic captured a transmission indicating that the fire was still burning, with a unit appearing to relay that information to others on the scene. By 7:31 p.m., Rock County fire units were heard referencing engines at a retail location and a house, though further specifics were not broadcast clearly.
Smoke Report in Marwood, Commercial Alarm in Cedar Crest
Separately, at 7:04 p.m., a resident report of a hazard in the Marwood area came in, with smoke detected, according to dispatchers. Scanner traffic did not include additional follow-up details on that call.
At 7:37 p.m., dispatchers broadcast a commercial fire alarm at Cedar Crest on Suffer River Road, described as a first-alarm commercial fire call. Shortly after the page went out, Rock County fire unit 8-20 was heard reporting en route, but scanner traffic then indicated that the alarm company had called back and issued a proper cancellation request, suggesting the alarm may not have indicated an actual fire.
Additional Calls
At 6:54 p.m., Rock County fire unit 341 was noted as being in quarters, and unit 349 was heard on scanner at 7:22 p.m. A separate transmission at 7:54 p.m. indicated that an officer would be out at L. Boeing regarding fireworks, unrelated to the fire activity earlier in the evening.
No injuries were reported in scanner traffic across any of the calls. Scene status and cause of the fires remained unclear based on available scanner audio.
Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.

