This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.

ROCK COUNTY, WI — A smoke and fire alarm event at a commercial building in Rock County drew a multi-agency response Thursday morning, July 23, 2026, with scanner traffic indicating dispatchers first received word of the incident at approximately 9:31 a.m.

Initial Reports: Smoke, No Visible Fire

According to scanner traffic, the initial call described a fire alarm activation at a commercial building, with dispatchers noting at 9:33 a.m. that there was “no fire, just smoke.” A brief reference to “two weapons, we’re trying to fire” was heard at 9:34 a.m., though the context of that transmission remained unclear. By 9:47 a.m., dispatchers were heard directing units to code the call as a commercial fire response, scanner audio indicated.

Multiple Agencies Responded

Rock County fire units were among the first dispatched, scanner traffic confirmed. At 9:47 a.m., Janesville Fire Department was also dispatched, with dispatchers indicating a residential-level response involving three engines and two AML buses, according to scanner audio.

At 10:06 a.m., dispatchers relayed that a fire truck from the airport was responding to the scene, with entry directed on the east side of the building, instructing units to proceed around the back. Scanner traffic at 10:07 a.m. indicated Rock County command requested an estimated time of arrival for the airport truck.

Extended Scene Operations

Scanner activity continued through mid-morning, with transmissions logged at 10:13 a.m., 10:20 a.m., and 10:38 a.m. referencing ongoing Rock County fire unit communications, though several of those transmissions were difficult to interpret clearly in scanner audio. At 10:20 a.m., dispatchers were heard issuing a program fire alert for Station 1, according to scanner traffic.

Secondary Alarm on West County Street

At 10:39 a.m., a separate commercial fire alarm was reported via scanner at West County Street, where a smoke alarm was described as going off in unit 5, with dispatchers noting “nothing showing.” Scanner traffic indicated a fire unit on scene requested that someone be sent to check on the situation. Engine 822 was signed off on the alarm at that location, according to dispatchers.

Additional Activation Late Morning

At 11:03 a.m., scanner traffic indicated another fire alarm activation, with a unit identified as responding to a dispatch from Conde. No injuries were reported in any of the scanner transmissions reviewed, and no information regarding cause or origin of the smoke or alarm activations was broadcast over scanner channels.

The scene status of the original commercial fire response was not explicitly cleared in scanner traffic captured during this incident window. 608scanner.com will continue to monitor for updates.

Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.