This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.

ROCK COUNTY, WI — A commercial fire alarm at a large industrial facility prompted a multi-unit response from Rock County fire and emergency services early Saturday morning, October 24, 2026, with scanner traffic first indicating units were en route shortly before 8:00 a.m.

Units Respond to Automatic Alarm

According to scanner traffic, unit 841 was en route to the location at approximately 7:54 a.m. Dispatchers reported at 8:03 a.m. that EMS would be sending a fire department unit to the scene in response to an automatic commercial fire alarm, with full station detection indicated.

By 8:08 a.m., dispatchers relayed that unit 1202 was assuming command at what was described as a large industrial facility. Scanner traffic at that time indicated the alarm was sounding and that people had exited the building and were outside while crews investigated.

Scene Cleared, Alarm Reset

The situation was resolved without a prolonged response. According to scanner traffic, engine 813 reported finishing up and becoming available at approximately 8:10 a.m. Shortly after, at 8:13 a.m., dispatchers confirmed the scene was clear and that the alarm had been reset, indicating no further emergency action was required at the facility.

No injuries were mentioned in scanner traffic, and no additional emergency resources were requested beyond those initially dispatched.

Additional Radio Traffic Noted

Scanner traffic also captured a brief communication at 7:58 a.m. in which a unit identified as Spotty 51 contacted Rock County fire dispatchers requesting that a Jefferson County SWAT vehicle be moved from the location. The reason for the vehicle’s presence was not explained in scanner traffic.

No cause for the alarm activation was identified in scanner communications, and no investigators were reported as being called to the scene. The alarm reset and scene clearance indicated the response was concluded by approximately 8:13 a.m., roughly 20 minutes after units were first dispatched.

Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.