This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.
ROCK COUNTY, WI — Rock County fire units responded to a commercial fire alarm on Scrant Avenue on the evening of August 23, 2026, with scanner traffic indicating the call came in around 7:54 p.m. and units were dispatched to investigate the alarm at the commercial location.
Initial Response and Dispatch
Scanner traffic first captured fire-related radio traffic beginning at approximately 7:40 p.m., with a fire assist call logged at 7:42 p.m. under the designation 536, according to dispatchers. At 7:44 p.m., Rock County fire units were noted on frequency, with scanner traffic indicating references to weapons protocol in connection with the call, though no further detail was broadcast regarding that notification.
At 7:49 p.m., scanner traffic from the Mercyhealth channel referenced Rock fire unit 1.33 at Mercyhealth, indicating at least one unit may have been positioned at or near the Mercyhealth facility during the early stages of the response.
Units Dispatched to Scrant Avenue
At 7:54 p.m., dispatchers confirmed that units 32-39 were headed to the scene on Scrant Avenue for a reported commercial fire alarm. Scanner traffic indicated dispatchers asked whether responding units should simply advise upon arrival, suggesting the nature of the alarm was under evaluation before crews made contact with the structure. The cross-reference designation of X-Billing and the address of Scrant Avenue were broadcast during that transmission, according to scanner audio.
Exterior Check and Alarm Assessment
At 7:58 p.m., scanner traffic captured instructions directing units to conduct an exterior check of the building, with dispatchers noting that nothing should be showing from the outside. A description of a “horrible alarm sounding” was broadcast during that transmission, according to scanner audio, indicating the alarm was actively triggering at the time of arrival.
By 8:17 p.m., scanner traffic indicated that fire alarm unit 642 had been identified as a rock generator, according to dispatchers. No injuries were reported over scanner traffic, and no mention of active fire, smoke, or structural damage was broadcast at any point during the incident.
Additional Unit Activity
At 8:27 p.m., a unit was heard over scanner traffic requesting to be placed on the Adam45 fire system and noted they were en route to relieve in what was referenced as a 4-break position, suggesting ongoing coordination among units as the scene was being managed, according to scanner audio.
No injuries were reported in scanner traffic, and no investigators or specialty units were announced as being called to the scene. The scene status was not formally declared cleared over the monitored scanner channels.
Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.

