This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.

ROCK COUNTY, WI — Multiple fire and law enforcement agencies responded to a commercial fire alarm in Rock County on Wednesday, June 24, 2026, with activity beginning around 1:48 p.m. and continuing into the early afternoon hours. Scanner traffic indicated the alarm ultimately proved to be a false alarm, with no fire, smoke, or odor found inside the building.

Initial Response and Units Dispatched

Scanner traffic indicated that Rockfire units and Battalion 1 were already in the field prior to the alarm, with transmissions at 1:44 p.m. and 1:45 p.m. noting that Rockfire and Battalion 8-81 were heading back to Section 1 to retrieve a squad. At 1:48 p.m., dispatchers broadcast a working-in-place assignment for EMS, fire alarm, and standby units. Additional Rock County fire units, including 842 and unit 8, were noted on scanner traffic at 1:54 p.m.

Location and Expanded Response

Scanner traffic at approximately 2:08 p.m. indicated that fire units designated as Farkeet and PDU were responding location-emergent, with cross-streets referenced as Run Port and Cherry, later clarified at 2:09 p.m. as Run Court and Cherry. At 2:09 p.m., dispatchers broadcast that fire and EMS were requesting a police department emergency response to the scene.

Janesville fire units were also dispatched, with scanner traffic at 2:13 p.m. indicating Janesville Fire was responding to an automatic commercial fire alarm at King Street. Rock County units including State 12 and State 14 were referenced at 2:19 p.m., with dispatchers directing incoming units to handle and support the fire alarm assignment. At 2:28 p.m., scanner traffic indicated that K12 was clear on air.

Police and Additional Units on Scene

At approximately 2:48 p.m., Rock County scanner traffic indicated that a police unit was positioned on the north side of Maine Street in connection with the response. The multi-agency coordination reflected the scale of the initial alarm, which drew both fire and law enforcement resources to the area.

No Fire Found; Scene Cleared

At 3:01 p.m., scanner traffic included a transmission stating that crews were inside the building and found no fire, no smoke, and no smell of anything. A follow-up transmission at 3:02 p.m. indicated that state water smoke information was acknowledged. At 3:03 p.m., Beloit Fire’s alarm chief and the Rock County fire alarm chief were both noted on scanner traffic in connection with the incident.

At 3:05 p.m., dispatchers confirmed a trouble alarm in the system, with scanner traffic stating there was no fire at that time. No injuries were reported in scanner traffic, and no investigators were noted as being called to the scene.

Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.