This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.
ROCK COUNTY, WI — A brief vehicle pursuit involving a white Dodge Charger near the Riverside Drive and ABC Parkway area of Beloit was reported to dispatchers late Tuesday night, August 11, 2026, setting off more than an hour of traffic-related activity for Rock County and Beloit units that extended past 1 a.m.
Chase Reported Near Riverside and ABC Parkway
Scanner traffic beginning around 11:30 p.m. referenced a male subject and a white Dodge Charger traveling at high speed. At 11:31 p.m., a unit was heard on the scanner expressing uncertainty about whether the vehicle had made contact with another, with traffic suggesting concern that it was moving toward a forward edge.
At 11:33 p.m., Beloit dispatch formally broadcast that county units had been involved in a short chase, with the pursuit described as moving through the area of Riverside Drive and ABC Parkway before the vehicle turned left and traveled northbound. Dispatchers noted the vehicle was out of Beloit and offered to repeat the information for any units that needed clarification.
At 11:34 p.m., scanner traffic indicated that the subject had not had headlights on and had passed another vehicle during the incident.
Subsequent Traffic Stops and Vehicle Checks
Following the initial chase activity, Rock County units remained active on traffic enforcement throughout the area. At 11:50 p.m., scanner traffic referenced a subject with a prior conviction, a vehicle check, and a GMC Sierra, with dispatchers also indicating a return showing the vehicle or subject as “dirty,” a term used in law enforcement to indicate a hit on a records check.
Additional traffic stops were logged as the night continued. At 12:21 a.m., scanner traffic referenced a vehicle described as a blue F-150. At 12:27 a.m., a blue Chevrolet was mentioned as being parked outside and flagged for contact by a unit.
Crash Signals and Unit Activity
At 12:41 a.m., Rock County scanner traffic included references to a 10-50 — a radio code commonly associated with a traffic accident — along with unit designators including G-15, 7-6, and 1-6, suggesting multiple units were active in the area. At 12:50 a.m., additional scanner traffic again referenced codes 11-15 and 10-50, indicating continued activity related to a possible crash or traffic hazard.
No injuries were publicly reported over the scanner during the incident, and no suspect names were broadcast. It was not made clear from scanner traffic whether the Dodge Charger from the initial pursuit was located or whether the later vehicle references were related to the chase.
Scene Cleared After Midnight
At 12:54 a.m., additional traffic unit activity was logged, and by 1:14 a.m., scanner traffic indicated the scene had been cleared. The full duration of law enforcement activity spanned approximately an hour and 45 minutes from the first broadcast to clearance.
608Scanner.com will update this report if additional information becomes available through official channels.
Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.

