This report was written from live scanner audio using automated transcription. Details are unconfirmed and may contain errors.

ROCK COUNTY, WI — A commercial apartment fire with visible smoke and flames drew a significant multi-unit response in Rock County on the morning of May 23, 2026, with scanner traffic first indicating fire activity at 7:27 a.m. and units continuing to work the scene for several hours.

Fire Reported at Laramie Lane Apartment

At approximately 8:17 a.m., dispatchers broadcast a call to 7-20-8 Laramie Lane, describing a commercial apartment fire with visible smoke and flames. Shortly after, at 8:20 a.m., scanner traffic indicated that a firefighter was on scene reporting a second-story room-and-contents fire, with units uncertain about parking on the Charlie side of the structure.

At 8:23 a.m., a Rock County unit confirmed arrival on scene, with scanner traffic indicating a working fire with light smoke showing and the establishment of a second division. Dispatchers also noted a hydrant located at the corner of Laramie and Canyon, according to scanner traffic.

At 8:22 a.m., scanner traffic referenced a subject, described as a 43-year-old, in connection with smoke exposure, though the details remained unclear in transmission. An earlier entry at 7:44 a.m. noted that a unit — identified as Rock Fire 1-4 — was unable to locate a patient at an updated location. By 7:52 a.m., unit 143 cleared the call, with scanner traffic indicating the patient declined transport to a hospital.

Multiple Units and Agencies Responded

Scanner traffic indicated a broad response involving multiple Rock County fire units and Janesville Fire. At 8:05 a.m., Rock Fire unit 140 was noted in contact with SSM Janesville. At 8:16 a.m., unit 140 was directed to a Janesville cemetery location, while a fire assist was also logged under call 27-2-08.

Janesville fire units were heard responding to what dispatchers described as a possible electrical fire on the south side of a building at 8:19 a.m. Rock Road units from station areas 842 and 844 were also noted en route to the fire scene around 8:33 a.m.

Later in the morning, at 9:39 a.m., scanner traffic indicated that unit FM-806 was in route to the Laramie location, arriving on scene at 9:42 a.m. At 9:44 a.m., a team was noted on fire operations. By 10:00 a.m., fire operations were heard moving communications to a secondary channel.

Separate Calls Handled During Response

While the Laramie Lane fire was ongoing, Rock County fire units were also managing additional calls. At 8:40 a.m., dispatchers noted an alarm activation at Elizabeth Street and asked which unit to send. At 8:46 a.m., unit 3-13 was on scene at Valley Drive, where scanner traffic indicated an evacuation was in progress. By 9:04 a.m., unit 313 reported no hazards found at Valley Drive and marked the call complete.

At 9:07 a.m., dispatchers advised that an employee appeared to be on scene at another location, and that an alarm company had called back but provided only a partial password. At 10:15 a.m., Rock fire units were requested to respond to a possible medical call at Rest Area 22-90 Westbound. At 10:24 a.m., unit 1321 was noted as coding to the hospital, according to scanner traffic.

Unit 313 was noted back in quarters at 9:30 a.m., and unit 29 was reported back in housing at 9:37 a.m. The scene at Laramie Lane remained active through the duration of scanner traffic monitored in this incident.

Stay informed on Rock County public safety with the free daily 608 Scanner briefing, or become a member for live scanner audio and full incident transcripts.